HCI Link Policy Commands

OGF	OCF	Op-code
`0x02`	`0x0001`	`0x0801`	V1.1	V1.2	Hold_Mode
`0x02`	`0x0002`	`0x0802`			not used
`0x02`	`0x0003`	`0x0803`	V1.1	V1.2	Sniff_Mode
`0x02`	`0x0004`	`0x0804`	V1.1	V1.2	Exit_Sniff_Mode
`0x02`	`0x0005`	`0x0805`	V1.1	V1.2	Park_Mode
`0x02`	`0x0006`	`0x0806`	V1.1	V1.2	Exit_Park_Mode
`0x02`	`0x0007`	`0x0807`	V1.1	V1.2	QoS_Setup
`0x02`	`0x0008`	`0x0808`			not used
`0x02`	`0x0009`	`0x0809`	V1.1	V1.2	Role_Discovery
`0x02`	`0x000A`	`0x080A`			not used
`0x02`	`0x000B`	`0x080B`	V1.1	V1.2	Switch_Role
`0x02`	`0x000C`	`0x080C`	V1.1	V1.2	Read_Link_Policy_Settings
`0x02`	`0x000D`	`0x080D`	V1.1	V1.2	Write_Link_Policy_Settings
`0x02`	`0x000E`	`0x080E`	—	V1.2	Read_Default_Link_Policy_Settings
`0x02`	`0x000F`	`0x080F`	—	V1.2	Write_Default_Link_Policy_Settings
`0x02`	`0x0010`	`0x0810`	—	V1.2	Flow_Specification